Hi, I’m using IoT Edge computer for my Vib+Temp and 3 Channel Current sensors.
I used Alpha Station V 126.96.36.199 for my USB Modem, but now I cannot use that for my edge computer.
Is there any other thing should I change for the connection? Cuz I have to change the reporting frequency for vib+temp sensor for every 7 seconds.
this is the connection settings of my Alpha Station
And also I have a small problem for the configuration of vibration sensor, not just like my current sensor, I cannot find my vibration sensor on my node-red debug window.
here is the setting of my node-red it’s the same with my current sensor setting.
I already tried the reset of sensor process(press and release reset button and then hold config button for 20 seconds and release and then press and release reset button)
is there other way that I can configure this? Thank you.
The Vibration sensor does not use the delay value to set report interval. That is used for RTC. Set Delay to 0. Scroll down in settings in the sensor’s Node-Red Config Node until you find Interval and set that value instead.