WiFi relay with 5 or 10 amp relays

General Discussion Projects
1

I have a contact closure to remote relay project. I am looking at the WiFi Relay with 5 or 10 AMP Relay boards, SKU PL_WIFI_510.

If programmed to do so, will these boards talk directly to each other over a WiFi network without going thorough a computer running Base Station to broker the transactions?

Could one board be programmed to take the analogue input, and instead of controlling the local relays, send them to a second board and control those relays?

This is is of course, what the Wireless Contact Closure Remote SPDT Relay Controller 8-Channel 1-Way does, but I’d rather spend $226 vs. $436 for my application.

2

Hi,

Unfortunately that is not possible. This would require a local network computer running N Button which would monitor the inputs on one board and send relay control commands accordingly to the second board.

For what you are describing the Wireless Contact Closure Remote SPDT Relay Controller 8-Channel 1-Way relay is the best solution I could recommend.