We are looking for the simplest solution.
Also, we are assuming the vibration data is either text, or easily parsed byte stream. Text is the easiest (obviously). The description of the PR52-33E does not say.
However, https://ncd.io/iot-wireless-vibration-sensor-product-manual/ in section 5.1 has the packet format. Run Mode. (Section 5.2 also has formats. Not sure if the 5.1 and 5.2 packets are the same - need to look at them in more detail.)
There is a note about using the Zigmo/Wireless router. Is that a viable alternative?
An alternative is the 900HP-S3B Wireless Modem - will that work? According to the description is “yes”. But is the PR52-33E a “900HP-S3B device” - I suspect “no”.
BTW, I also found Vibration sensor V3 - #2 by Bhaskar
Do we really need alpha station or node red?