PR55-22 on TLR1x

Hi, I have a NexGen wifi device. The guide says the LED will be blue when in config mode, and that it will broadcast an SSID.

My module has a blue/red indication on startup, and then flashes red. At no time does it broadcast an SSID.

How do I place it in config mode. I have tried moving the link to PGM on the main board.

There are 2 undocumented pushbuttons on the wifi board marked R and C. What do they do?

Hi Don,

To put the module into CFG mode press the C button near the USB connector. It should enter config mode. If not press and hold the C button, then press the R button, wait for the LED to turn Blue, then release the C button.