P33-7 Current loop receiver

Hardware
1

Hallo,
I’m trying to use the P33-7 to read the current signal of an TSI Dusttrack 2 device. Rather new to the topic I did not pay attention whether there is only one active device in the loop or multiple. It turns out that the dust monitoring device is suppling a voltage of 10 V. Can I tell the P33-7 not to supply the 16V?

Thanks
Siggi

2

Hi Siggi,
The PR33-7 is active 4-20mA and this can not be disabled.

The ideal product for you application would be