Yes I was aware that the ability to set NH was not a parameter/option you exposed on any of the software (alpha station) or package (node-red-enterprise-sensors).
For the previous generation temp/humidity nodes I would place them in config mode with the button combo procedure. I then used XCTU with a connected modem and use the network discovery scan which would discover the node and I would be able to set parameters including the network hops (NH). I had posted about it a while back which Increasing max number of hops - #7 by duelingcats
I am hoping with this new gen I can still configure this parameter via network discovery method mentioned previously or some other wireless communication so I don’t need to pull out the Xbee module and place it in a USB programmer for each one. Is that doable?